Process Dynamics And Control

This subject has the following teaching availabilities in 2016:

Estimated 200 hours

AND ONE OF:

CHEN20008 Chemical Process Analysis 2 or CHEN20011 Chemical Process Analysis may be taken concurrently by students admitted to the Master of Engineering.

None

Students undertaking this subject will be expected to be competent in the use of Matlab.

CHEN30009 Process Dynamics and Control

For the purposes of considering applications for Reasonable Adjustments under the Disability Standards for Education (Cwth 2005) and Students Experiencing Academic Disadvantage Policy, this subject requires all students to actively and safely participate in laboratory activities. Students who feel their disability may impact upon their participation are encouraged to discuss this with the Subject Co-ordinator and the Disability Liaison Unit http://www.services.unimelb.edu.au/disability/Contact

AIMS

Continuous chemical processes are inherently dynamic systems – process inputs and outputs change in time. To accommodate this, modern plants require some form of automatic control. This subject equips students with the skills to understand how and why key process variables change in time, and to then design and implement effective control strategies to accommodate this.

Students are introduced to the concept of feedback control, with examples of control schemes for common unit operations. Time domain analysis of process dynamics is performed using linear ordinary differential equations, Laplace transforms, and transfer functions. The response of complex process plants to common dynamic inputs is investigated. Students are introduced to frequency response analysis and Bode plots. The development of empirical dynamic models, and numerical simulation using MATLAB, is also covered.

The process control component of the subject introduces the concept of closed loop transfer functions and the PID controller. Dynamic process simulation is performed using analytical techniques and with the numerical simulation capabilities of the MATLAB Simulink software package. The stability of closed loop systems is analysed using techniques such as Routh stability analysis, the Bode stability criterion, and gain and phase margins. The effect of controller tuning constants on control system response is investigated, along with various controller tuning methods. Advanced control strategies including cascade control, time-delay compensation, and feedforward control are developed, as well as techniques to simultaneously control multiple process variables in multiloop systems.

INDICATIVE CONTENT

Feedback control schemes for common unit operations. Developing and solving dynamic process models, including the application of Laplace transforms and transfer functions as well as the use of numerical simulation tools. Frequency response analysis and Bode plots. Modelling of closed-loop control systems and PID controllers. Closed-loop stability analysis and controller tuning. Advanced single-loop control strategies and multiloop control systems.

INTENDED LEARNING OUTCOMES (ILO)

On completion of this subject the student is expected to:

1. Understand how key process variables change in time for common chemical processes responding to typical dynamic inputs
2. Be able to model the dynamics of common unit operations, using analytical methods and computer simulations
3. Analyse and implement effective and efficient control strategies for chemical processes
4. Understand how feedback controllers operate and be able to tune them
5. Demonstrate mastery of the mathematical modelling of feedback and other control loops
6. Appreciate how and when to implement advanced forms of process control and understand complications arising from multiloop control.

• Attendance and participation in a single laboratory classes with a written assignment of approximately 1000 words (10%). Requiring a time commitment of 13-15 hours of work including preparation. Intended learning Outcomes (ILOs) 1 and 2 are addressed in this laboratory class, due from Weeks 6 to 11
• Two written assignments (20% total - 10% each) each of approximately 1000 words; each requiring 13-15 hours of work. An overall time commitment of 25-30 hours. ILOs 1 to 6 are addressed in the assignments. Due weeks 6 to 12
• One written 3-hour closed book end-of-semester examination (70%). ILOs 1 to 6 are addressed in the exam. The examination is a hurdle and must be passed to pass the subject.

Hurdle requirement: A mark of 40% or more in this examination is required to pass the subject

None

Seborg, Edgar, Mellichamp, Doyle, Process Dynamics and Control, Third Edition 2011, Wiley.

This subject is not available as a breadth subject.

• Ability to apply knowledge of basic science and engineering fundamentals
• In-depth technical competence in at least one engineering discipline
• Ability to undertake problem identification, formulation and solution
• Ability to use a systems approach to design and operational performance
• Ability to optimise control systems for maximum efficiency
• Ability to apply engineering methods to solve complex problems.

LEARNING AND TEACHING METHODS

The subject is delivered through a combination of lectures and tutorials. Students also complete an experiment and a simulation-based controller design project, applying material covered in the lectures.

INDICATIVE KEY LEARNING RESOURCES

Lecture notes and slides. Worked solutions to tutorial problems. Online quizzes. All content is made available via the LMS.

CAREERS / INDUSTRY LINKS

Case studies on practical control and process safety systems, delivered by a practicing control engineer.