Mobile and Wireless Networks and Design

Subject ELEN90013 (2011)

Note: This is an archived Handbook entry from 2011.

Credit Points: 12.50
Level: 9 (Graduate/Postgraduate)
Dates & Locations:

This subject has the following teaching availabilities in 2011:

Semester 1, Parkville - Taught on campus.
Pre-teaching Period Start not applicable
Teaching Period not applicable
Assessment Period End not applicable
Last date to Self-Enrol not applicable
Census Date not applicable
Last date to Withdraw without fail not applicable


Timetable can be viewed here. For information about these dates, click here.
Time Commitment: Contact Hours: 1 x3 hour lecture per week
Total Time Commitment: 120 hours
Prerequisites: 4-year Electrical Engineering degree or equivalent.
Corequisites: None
Recommended Background Knowledge: None
Non Allowed Subjects:

Credit may not be obatined for both

ELEN90013 Mobile and Wireless Networks and Design and (431-633) Mobile and Wireless Networks

Core Participation Requirements: For the purposes of considering request for Reasonable Adjustments under the Disability Standards for Education (Cwth 2005), and Students Experiencing Academic Disadvantage Policy, academic requirements for this subject are articulated in the Subject Description, Subject Objectives, Generic Skills and Assessment Requirements of this entry. The University is dedicated to provide support to those with special requirements. Further details on the disability support scheme can be found at the Disability Liaison Unit website: http://www.services.unimelb.edu.au/disability/

Coordinator

Dr Paul Fitzpatrick

Contact

Email: pgf@unimelb.edu.au
Subject Overview: This subject provides the fundamentals of mobile and wireless network design. In particular it includes the following topics:
  • Introduction to wireless communications.
  • Frequency division, orthogonal frequency division, time division and code division multiple access. Frequency division duplexing and time division duplexing
  • The cellular concept, frequency reuse, channel allocation schemes, handoff, call control, interference, C/I analysis, interference limited capacity, sectorisation, system capacity based on call blocking.
  • Teletraffic models for cellular mobile networks, Erlang loss function (Erlang B), Erlang delay (Erlang C), M/M/m, M/M/m/n, M/G/1 Processor Sharing queue and their application to dimensioning cellular communications networks for voice and data, system capacity, demand modelling and performance, Grade of Service and Quality of Service
  • Propagation, free space propagation, basic propagation mechanisms, two ray model, empirical path loss models (Hata, Cost231-Hata, Erceg), log-normal shadow fading, small-scale multipath propagation and Rayleigh fading:.
  • SNR, sensitivity and link budget calculations, micro and macro diversity to combat fading, calculation of radio coverage for cellular networks: multiple access techniques for cellular communications.
  • CDMA system principals & spread spectrum for 3G wireless systems
  • Cellular broadband wireless systems (3G+ and 4G).
Objectives: On completion of this subject, students should have developed the skills and knowledge required to understand the fundamentals of the design and evaluation of mobile and wireless networks and to be able to solve technical problems in the following areas:
  • Analysis and evaluation of re-use planning via the calculation of key performance indicator such as CIR
  • Application and evaluation of propagation models to wireless networks.
  • Teletraffic modelling and performance analysis for wireless networks
  • Dimensioning of wireless networks
  • Modelling and design of wireless systems
  • Performance evaluation of wireless broadband networks
  • Design and evaluation of coverage for wireless networks based on a link budget
  • Large and small scale fading mitigation using space diversity techniques

The student should be able to perform a basic design of a wireless system for both coverage and capacity for given performance targets. They should also be able to evaluate the coverage, capacity and or performance of a wireless system.
Assessment: • Formally supervised written examination – 3 hours 70% (end of semester). This final exam is a hurdle. To pass the subject students must pass t the final examination
• A Project equivalent to 3000 words 30%.
Prescribed Texts:

Reading:

H. Holma and A. Toskala, WCDMA for UMTS – HSDPA Evolution and LTE, J. Wiley & Sons, New York, 4th Ed., 2007
E. Dahlman, S. Parkvall, J Skold and P. Bemming, “3G Evolution HSDPA and LTE for Mobile Broadband”, Elsevier, Amsterdam, 2nd Ed., 2008
H. Holma and A. Toskala, WCDMA for UMTS, J. Wiley & Sons, New York, 3rd Ed., 2005
H.Holma and A. Toskala, HSDPA/HSUPA for UMTS, J. Wiley & Sons, New York, 2006
T.S. Rappaport, Wireless Communications: Principals and Practice, 2nd Edition, Prentice Hall, 2002
L. Kleinrock, Queuing Systems: Volume 1 - Theory, John Wiley & Sons New York, 1975
W.C. Jakes, Microwave Mobile Communications, Wiley-Interscience, 1974
Breadth Options:

This subject is not available as a breadth subject.
Fees Information: Subject EFTSL, Level, Discipline & Census Date
Generic Skills:

On completion of this subject, the students should have developed:

• Problem solving and analytical skills,
• Critical and creative thinking, with an aptitude for continued self-directed learning;
• Sense of intellectual curiosity;
• Ability to interpret data and research results;
• Ability to learn in a range of ways, including through information and communication technologies;
• Capacity to confront unfamiliar problems;
• Ability to evaluate and synthesise the research and professional literature;
• Ability to develop models of practical applications and evaluate their performance by rigorous analytical means;

Related Course(s): Master of Telecommunications Engineering

Download PDF version.