Structural Theory and Design 2

Subject CVEN90049 (2016)

Note: This is an archived Handbook entry from 2016.

Credit Points: 12.5
Level: 9 (Graduate/Postgraduate)
Dates & Locations:

This subject has the following teaching availabilities in 2016:

Semester 1, Parkville - Taught on campus.
Pre-teaching Period Start not applicable
Teaching Period 29-Feb-2016 to 29-May-2016
Assessment Period End 24-Jun-2016
Last date to Self-Enrol 11-Mar-2016
Census Date 31-Mar-2016
Last date to Withdraw without fail 06-May-2016


Timetable can be viewed here. For information about these dates, click here.
Time Commitment: Contact Hours: 48 hours (Lectures: 36 hours per semester; Tutorials: 12 hours per semester)
Total Time Commitment:

120 hours

Prerequisites:

Successful completion of the following subject is required:

Subject
Study Period Commencement:
Credit Points:
Corequisites: None
Recommended Background Knowledge: None
Non Allowed Subjects: None
Core Participation Requirements:

For the purposes of considering request for Reasonable Adjustments under the Disability Standards for Education (Cwth 2005), and Student Support and Engagement Policy, academic requirements for this subject are articulated in the Subject Overview, Learning Outcomes, Assessment and Generic Skills sections of this entry.

It is University policy to take all reasonable steps to minimise the impact of disability upon academic study, and reasonable adjustments will be made to enhance a student's participation in the University's programs. Students who feel their disability may impact on meeting the requirements of this subject are encouraged to discuss this matter with a Faculty Student Adviser and Student Equity and Disability Support: http://services.unimelb.edu.au/disability

Coordinator

Dr Elisa Lumantarna, Prof Priyan Mendis

Contact

Dr Elisa Lumantarna

elu@unimelb.edu.au

Professor Priyan Mendis

pamendis@unimelb.edu.au

Subject Overview:

AIMS

This subject introduces more advanced methods of structural analysis and design, and their applications to the engineering of reinforced concrete and structural steel in compliance with the standards. Students will be given the opportunity to integrate the use of different materials into the design of contemporary structures through design projects. This subject would typically be that final subject in the sequence of structural engineering subjects for civil engineering students who do not want to specialise in structural engineering.

INDICATIVE CONTENT

Topics covered include: structural analyses of beams and frames by the stiffness matrix method; computer analysis using SPACEGASS; virtual work and influence line diagram; design of thin walled sections, structural design of reinforced concrete beams, slabs and columns; structural design of steel beams, columns and connections.

Learning Outcomes:

INTENDED LEARNING OUTCOMES (ILO)

On completion of this subject the student is expected to:

  1. Implement Displacements Methods (involving the use of stiffness matrices) for the analysis of indeterminate beams and frames
  2. Be familiar with a structural analysis package (eg. Spacegass) as applied to a common structural system
  3. Implement Virtual Displacement method and reciprocal theorem for the construction of Influence lines
  4. Implement the design of RC beams, columns and slabs with combined loading
  5. Implement the design of thin walled sections for the determination of the shear centre and torsional analysis
  6. Describe the concepts of uniform/non-uniform torsion; asymmetrical bending
  7. Design structural systems involving the combined use of materials.
Assessment:
  • One 2000 word group assignment (10%) in groups of 6 students, requiring 15 hours of work, due week 6. Intended Learning Outcome (ILO) 7 is addressed in the group assignment
  • Four 250 word laboratory assignment reports (5% each) due at regular intervals throughout the semester, requiring approximately 8 hours of work. ILOs 1, 2 and 4 are addressed in the four assignment reports
  • One 3-hour examination (70%) end of semester. ILOs 1 to 6 are addressed in the examination.




Prescribed Texts: None
Breadth Options:

This subject is not available as a breadth subject.

Fees Information: Subject EFTSL, Level, Discipline & Census Date
Generic Skills:
  • Ability to apply knowledge of science and engineering fundamentals
  • Ability to undertake problem identification, formulation and solution
  • Ability to utilise a systems approach to complex problems and to design for operational performance
  • Proficiency in engineering design
  • Ability to conduct an engineering project
  • Ability to communicate effectively, with the engineering team and with the community at large
  • Ability to function effectively as an individual and in multidisciplinary and multicultural teams, as a team leader or manager as well as an effective team member.
Notes:

LEARNING AND TEACHING METHODS

The subject will be delivered through a combination of lectures, tutorials and workshops. In addition, students will undertake a design exercise which involves applying the learnt techniques in solving problems that are likely to be encountered in practice.

INDICATIVE KEY LEARNING RESOURCES

Students will have access to lecture slides, recommended reading materials, Steel Structures Design Handbook HB48 by Standards Australia, Australian Standard AS3600 for the Design of Concrete Structures, EXCEL spreadsheets showing examples of numerical simulations and SPACE GASS package. The subject's LMS site also contains worked solutions for all tutorial problems.

CAREERS / INDUSTRY LINKS

Representatives from Steel Reinforcement Institute of Australia will contribute to the teaching of the subject. In addition, practising structural engineers will also contribute to the teaching of the subject and give advice on the assignment exercises.

Students who successfully complete this course would typically find employment in a civil engineering consultancy or contracting company and could use the knowledge from this subject to propose designs or design variations under the supervision of a chartered professional engineer.

Related Course(s): Master of Architectural Engineering
Related Majors/Minors/Specialisations: B-ENG Civil Engineering stream
Master of Engineering (Civil with Business)
Master of Engineering (Civil)
Master of Engineering (Structural)

Download PDF version.